PLC Programmable Controller Module w Ladder Logic Software Programming interface

Description

Learn the best of the PLC programming world
The basic and advanced ladder logic
software
FREE  Power Adapter  24VDC
This is a training course in ladder logic from basic functions to advanced applications as used in the industry today.
Also included
is the New function block PLC, 1 programming, 2 simulation, 3 monitoring, easy to learn and fast to implement from the simplest to the most advanced application.
The
USB
is loaded with examples, Hardware and Software manuals
Software for Windows 10, 32bit.  Software  is FREE, cost include examples and data compilation
Supplied:
ONE PLC Professional Board 20I/O
ONE USB - RS232 Interface
ONE  USB Flash Drive With Software and Electronic Manuals
1
PLC Ladder Logic
FX Programming Software
GX-DEV FX- 8.25
Open Software
CD includes Programming and Hardware Manual
Features: 1000 steps L
adder
D
iagram,
and
I
nstruction
L
ist
Software supports all this FX processors
FX0/FX0S, FX0N, FX1S, FX1N, FX(FX2/FX2C)
FX2N/FX2NC.
FX3u
FX MELSEC single user FX Win Version 8.25, 1000 step for FX PLCs controllers series.
This is the standard software easy to use and simple, intuitive interface and a short learning curve.
Full upload and download, monitor, test and program all the Mitsubishi FX-series PLC
package includes   the software and manuals in electronic format for programming and hardware installation .
Learn the
Easy to use
logic
block functions programming
P
rogram PLCs
in the comfort of your own time in your PC.
PLC Programming & Simulator Software comes with most of the features of the HI-end industrials PLC's instructions
such as in  Allen-Bradley, Siemens, Mitsubishi, Electrodepot, Fanuc, Omron etc.
Ideal for engineers or students who are ready to prepare real projects and exercise any automation challenge
2 - Hardware
Features:
FX1N-20mr
PLC with 12 Inputs and 8 Relay Outputs
This programmable logic controller uses industrial-grade 32-bit MCU with strong anti-interference and faster speed.
High quality chip, stable performance, on-line download, on-line monitoring, automatic save when power off.
Program is written in ladder logic programming language, supports for GX-Developer, GX-work2.
Programming port is the port for program upload, download, test and monitor.
It is reusable, stable, easy to learn. The PLC transmission baud rate is 9600.
Specifications:
Model: FX1N-20mr
Operating Voltage: DC24
（
V
）
Wide Power Supply Voltage: 10-28VDC
Baud Rate: 9600
Programming Software: for GX-Developer, for GX-work2.
Size: Approx. 86 x 73 x 20mm / 3.4 x 2.9 x 0.7inch
Weight: 120G
Package Included:
1 x PLC Board
Module function:
This module is programmable control, can achieve thousands of functions, stable and reliable working performance, built-in watchdog timer circuit, to ensure that the module for a long time to run!!!
Some of the common features are shown as follows:
Turn on the power supply, the relay 1 is closed for N seconds and then disconnect the relay 2 for N seconds.
When the power supply is turned on, the relay 1 is switched off after N seconds, and then the relay 2 is closed for N seconds and then is turned off.
The power supply is switched on, the relay 1, 2 have no action, when a signal or trigger button, relay 1 closed off after N seconds; then relay 2 closed off after N seconds, until the next trigger, repeat the same action.
Through the signal 1, 2 programming, the control can be achieved on the relay 1 and 2 arbitrarily.
When the signal 1 has a signal, the relay 1 is closed, the relay 2 is disconnected; when the signal 2 has a signal, the relay 1 is turned off, and the relay 2 is closed.
Can be connected to the NPN sensor signal, the sensor signal programming, to achieve arbitrary control of the relay.
When the signal 1 is triggered, the relay 1 is controlled, and when the signal 2 is triggered, the relay 2 is controlled.
Turn on the power supply, the control motor is turning N seconds, and then reverse N seconds, followed by the cycle.
When the signal 1 has a signal, the motor is controlled to rotate; when the signal 2 has a signal, the motor is reversed.
These are just some examples, modules can achieve far more than these functions
Input high speed pulse C235, C251 and FX1N compatible.
Output relay 1A output, Rated current 5A, can directly drive DC solenoid valve, AC solenoid valve, AC contactor, AC motor, etc,.
Precautions for use:
The PLC with two programming port. The 232 interface, you can directly use the USB-232 serial port with a computer to download the program directly. The TTL interface.
Built-in Analog input AD, corresponding to internal data register D5030.(Not D8030)
Built-in Analog output DA, corresponding to internal data register D5101.
When the PLC need to connect with the touch screen or text, can be used to connect 232 programming port.
Assistant Relay
Normal Use
M0 - M383
Hold After Power Off
M384-M1535
Special Use
M8000-M8255
State
Holding Use
S0-S999
Timer
100MS
T0-T199
10MS
T200-T245
1MS
T246-T249
100MS accumulation
T250-T255
Counter
16-bit
C0-C15(0-32767)
16-bit(Hold After Power Off)
C16-C199
High Speed(Hold After Power Off)
C200-C255
Data Register
16-bit
D0-D127
16-bit(Hold After Power Off)
D128-D5029
16-bit Special Use(AD)
D5030(Output Voltage: 0-10V)
16-bit Special Use(DA)
D5101(Output Voltage: 0-3.3V)
DISCLAIMER
Please Note:
We do not provide any type of technical assistance
Please contact a Certified professional
or a Mitsubishi PLC Specialist
Mitsubishi PLC,
GX-Developer, GX-work2.
are a registered trade marks of Mitsubishi Electric
Windows is registered trade mark of Microsoft Corporation
Copyright 2018
IBM
®
PC or higher compatible computer
Windows
®
operating system,  Vista, Win 7, Win 8, Win 10
Minimum of 128 megabyte of RAM memory.
Minimum of 12 megabyte of available hard disk space.
800 x 600 or higher screen video capability.
Optional Graphics-capable printer.
CD-ROM drive.
Price include compilation of data CD production Software is FREE
NOTE   International  Shipping Via Ebay
Global Shipping Program
-